YOGYAKARTA — The Department of Mechanical Engineering (DTM), Vocational College, Universitas Gadjah Mada (SV UGM), hosted an Industrial Guest Lecture in collaboration with PT Gaya Makmur Mobil on Thursday, October 8, 2026. Carrying the theme “Transformasi Alat Berat Menuju Era Elektrifikasi: Teknologi, Perawatan, dan Kompetensi Masa Depan” (Heavy Equipment Transformation Towards the Electrification Era: Technology, Maintenance, and Future Competencies), the event was held offline at the Ballroom of the Teaching Industry Learning Center (TILC) Building, SV UGM, Sleman, Yogyakarta. read more

TOKYO – In a continuous effort to respond to the challenges of modern engineering and vocational higher education, the Department of Mechanical Engineering at the Vocational College, Universitas Gadjah Mada (DTM SV UGM) continues to expand its international network. On Tuesday (6/10/2026), a DTM SV UGM delegation represented by Dr. Eng. Ir. Agustinus Winarno, S.T., M.Eng. conducted a strategic visit and discussion with Prof. Yasuyuki Yokono from the Graduate Program for Social Design Innovation (GMSI), The University of Tokyo, Japan. read more

YOGYAKARTA — Rian Miftahul Huda, an alumnus of the Applied Bachelor Program in Heavy Equipment Management and Maintenance (TPPAB), Department of Mechanical Engineering, Vocational College, Universitas Gadjah Mada (DTM SV UGM), received the Best Paper Award at the 12th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM) 2026. The international conference was held on September 10–11, 2026, at Truntum Kuta, Bali, Indonesia.

The award was presented for the paper entitled “Data-Driven Parameter Optimization of Heavy-Duty Electro-Hydraulic Actuators Balancing Dynamic Tracking and Volumetric Loss.” The paper was developed from Rian’s final project at the TPPAB Program, DTM SV UGM, under the supervision of Irfan Bahiuddin, S.T., M.Phil., Ph.D., IPM., ASEAN Eng. After completing his studies, Rian has also been actively involved as a teaching assistant at DTM SV UGM.
The paper was authored by Rian Miftahul Huda, Irfan Bahiuddin, Farhan Fadhlurrahman, M. Hilmi Wicaksono, Feri Arifin, Andhi Akhmad Ismail, and Mohd Hatta Mohammed Ariff. The research focuses on a data-driven approach to optimizing the parameters of electro-hydraulic actuators for heavy-duty applications by considering the balance between dynamic tracking performance and volumetric loss.
The research was subsequently developed into a scientific paper and presented at ICE-SEAM 2026, which carried the theme “Integrating Green Energy, Advanced Materials, and Sustainable Manufacturing for Net Zero Transformation.” Following the conference evaluation process, the paper by Rian and the research team was selected to receive the Best Paper Award.
This achievement demonstrates the potential of student final projects to be further developed into research outputs that can be presented and recognized at international scientific forums. It also strengthens the integration of education, research, and technological development relevant to heavy equipment management and maintenance at DTM SV UGM.
This achievement aligns with the Sustainable Development Goals (SDGs), particularly SDG 4: Quality Education, through strengthening student learning and research; SDG 9: Industry, Innovation and Infrastructure, through the development of electro-hydraulic actuator technology for heavy-duty applications; and SDG 17: Partnerships for the Goals, through research collaboration and the dissemination of scientific findings. read more

YOGYAKARTA — The Department of Mechanical Engineering (DTM), Vocational College, Universitas Gadjah Mada organized a two-day technical training on automation control from Monday to Tuesday, August 11–12. The event took place at the Automation Control Laboratory, 2nd Floor, Grafika Building, DTM SV UGM, featuring expert instructor Anggara Riyadi from PT Mitsubishi Electric Indonesia (MEIN).

The training was attended by 13 participants, including faculty members, educational staff, and laboratory personnel from DTM SV UGM. Among the attendees were Ir. Andhi Akhmad Ismail, S.T., M.Eng.; Ir. Irfan Bahiuddin, S.T., M.Phil., Ph.D., IPM., ASEAN.Eng.; Dr. Ir. Widia Setiawan, S.T., M.T., IPM.; Ir. Budi Basuki, S.T., M.Eng.; Ir. Felixtianus Eko Wismo Winarto, M.Sc., Ph.D.; alongside technical staff and laboratory engineers. This initiative was aimed at strengthening the human resource capacity in mastering state-of-the-art industrial automation technologies to support modern, industry-aligned laboratory education. read more

YOGYAKARTA — The Department of Mechanical Engineering, Vocational College, Universitas Gadjah Mada (DTM SV UGM), held a strategic discussion with representatives from the National University of Singapore (NUS) on Tuesday, August 4, 2026. The meeting, held in the DTM SV UGM Meeting Room from 1:00 to 3:00 p.m., discussed potential collaboration on processing plastic bottle waste into filament for 3D printing, which could be utilized in community service activities in Yogyakarta.

The visit was attended by Derick Tay, Chok-Oon-Kit Khanatip, and their team from NUS, who visited DTM SV UGM in person. Representatives from DTM SV UGM included Dr.Eng. Yosephus Ardean Kurnianto Prayitno, S.T., M.Eng.; Dr. Ir. Sugiyanto, S.T., M.Eng., IPM.; Ir. Irfan Bahiuddin, S.T., M.Phil., Ph.D., IPM., ASEAN Eng.; Dr. Ir. Bambang Hari Priyambodo, S.T., M.Eng.; and staff members of the Industrial Equipment Laboratory. The meeting marked an initial step toward establishing an international partnership focusing on recycling technology and community service. read more

YOGYAKARTA — The Department of Mechanical Engineering, Vocational College, Universitas Gadjah Mada (DTM SV UGM), in joint collaboration with Jakarta State Polytechnic (PNJ), successfully convened the 16th National Conference on Mechanical Engineering (SNTM XVI) on Thursday, July 23, 2026. The national conference took place at the Teaching Industry Learning Center (TILC) Building, SV UGM, Yogyakarta.

SNTM XVI 2026 was organized as a collaborative platform to disseminate research outcomes, technological innovations, and strategic insights among academics, researchers, and industry practitioners. Centered on the theme “Smart and Sustainable Engineering in Manufacturing, Energy, and Heavy Equipment for Industrial Transformation toward Net Zero”, the joint conference emphasized driving industrial transformation toward sustainability and net-zero carbon targets. read more

The Department of Mechanical Engineering, Vocational College, Universitas Gadjah Mada successfully held an International Guest Lecture entitled “CAD for Engineering Design and Additive Manufacturing Applications” on Thursday, 4 June 2026. The event was conducted online via Zoom from 07:30 to 09:15 WIB or 08:30 to 10:15 Malaysia Time.

The guest lecture featured Dr. Abdul Yasser bin Abd Fatah, Senior Lecturer at Universiti Teknologi Malaysia (UTM), Coordinator of the Master of Science in Engineering Design, Faculty of Artificial Intelligence, UTM. The session was attended by students of the Department of Mechanical Engineering, Vocational College UGM, as part of learning enrichment in a course taught by Assoc. Prof. Ir. Irfan Bahiuddin, S.T., M.Phil., Ph.D., IPM, ASEAN Eng. read more

Kuala Lumpur, Malaysia – Five students from the Vocational College of Universitas Gadjah Mada (SV UGM), accompanied by two supervising lecturers, participated in the SEMI TECH Zoomers Bootcamp – ASEM organized by SEMICON Southeast Asia from May 4–7, 2026, at the Malaysia International Trade and Exhibition Centre (MITEC), Malaysia. The program was designed to introduce university students to the international semiconductor industry and enhance their understanding of technological advancements and modern manufacturing practices. read more

Yogyakarta, 29 October 2025 — The Department of Mechanical Engineering (DTM), Vocational School, Universitas Gadjah Mada held an International Guest Lecture titled “Application-Driven Mechatronic Control: Bridging Design and Performance in Robotic Systems.” This event aimed to enhance students’ understanding of mechatronics by exploring both fundamental concepts and practical applications in modern robotic and control systems.

The session featured Dr. Azizan Bin As’arry from Universiti Putra Malaysia (UPM), an academic with extensive research experience in mechatronics and control engineering. The lecture was conducted online via Zoom and attended by students from multiple classes within DTM SV UGM. read more

Yogyakarta, 17 November 2025 — The Department of Mechanical Engineering (DTM), Vocational School, Universitas Gadjah Mada conducted an International Guest Lecture titled “An Introduction to Machine Learning: From Theory to Practice.” This event aims to broaden students’ understanding of artificial intelligence technologies while strengthening international academic collaboration.

The guest lecture featured Dr. Kasma Diana Binti Saharuddin from the Department of Engineering and Built Environment, Tunku Abdul Rahman University of Management and Technology (TAR UMT), Penang, Malaysia. The session was held online via Zoom. read more